windows 7 optimizer

Tested above the easiest way.

Obviously this can be classified as regular Microsoft from time to time, “intimidation”,

this is the helplessness of the piracy.

1. In general, the slow USB interfaces, so the equipment will speed the computer starts more

obvious influence, should try to start after connecting USB devices. If no USB device, it is

recommended that USB will be directly in the BIOS settings turned off.
Body:

1.
In general, the slow USB interfaces, so the equipment will speed the computer starts more

obvious influence, should try to start after connecting USB devices. If no USB device, it is

recommended that USB will be directly in the BIOS settings turned off.

2.

3.
This is due to the use Bootvis.exe program, which Mrxsmb.dll file for the computer to start

the Add 67 seconds!

4.

5.
Because Windows must be loaded at startup for each partition, with the number of partitions

increases, the amount of time to complete this operation will continue to grow.
6.
Each time you start Windows and displays the desktop, you need one by one to find a desktop

shortcut icons and load them, the more icons, of course, the time it takes the more. Suggest

that you will not commonly used desktop icons into a special folder or simply delete!

7.
This would be best not to use or not to delete the fonts used, to avoid accidental deletion,

can first make the necessary backup.
8.

Body:

windows 7 optimizer

windows 7 optimizer
At this point, with the U disk to install the operating system is ready! You can not drive

can not forget the trouble to install the operating system.

It is worth mentioning that, since the whole process is to read data in the hard disk, so

installing speed much faster than CD-ROM installation.

Careful you might have found, with this launch U disk, do not be afraid to crash, the

important information stored in the C plate can not be saved, because as long as you use U

disk to start WinPE, important information can go to backup to the other partition. Hope

that users can learn by analogy based on the flexible use of WinPE installed on the U disk

that is used on the tool.

windows 7 optimizer

windows 7 optimizer
When you enter the correct password, you can see a selection menu, select “WinPE By:

MAOTAO”.

Directly on the C drive format operation, the shocking enough, right? The new XP

installation, we first operate on the C drive is formatted.

U WinPE disk with the computer on the C drive is formatted, please come to a virtual drive

and then to help.

If you have drive, so long as this “quick 8-minute version 6.5″ CD-ROM into the CD-ROM drive

installed directly on the line in, but do not drive, so we took some trouble to install the

system.

This is what we are going to the location of the installed system.

Use it to restore the system to a previous ghost image is formatted the C drive in the

computer.

First select From Image, and then find the virtual drive to load the CD-ROM catalog, the

GHOSTXP.GHO selected, and then choose to return to the hard disk, and then choose to return

to the partition.

windows 7 optimizer

windows 7 optimizer

U must be selected here on the hard disk and do the wrong, you can point out from the size

of which is U disk. The author of the U disk is 2G, so it should select the (hd1) [1898M].

The following “options” section can not control, do not check any of the default parameters

on the line. Confirm the above steps, click “Install” and then the next step.

After setting, we must remember that you set a good password, otherwise start the U disk

will not be used.

You no longer have to upset no optical drive can not boot from the CD, because later you can

start from the U disk to install the operating system! Want to know how to operate it? Next

to begin.

On this, different computers have different versions of the bios setting method, but are

similar, the purpose is to let the computer boot entry into the first U disk. The following

example, we have several different bios adjustment method.

windows 7 optimizer

windows 7 optimizer

A notebook of common sense knows, the price and portability are the positive and negative

field notebook proposition opposition between them and could not always live in harmony,

even if the country in efforts to promote a harmonious society.
Body:

A notebook of common sense knows, the price and portability are the positive and negative

field notebook proposition opposition between them and could not always live in harmony,

even if the country in efforts to promote a harmonious society.

Thus they choose to only exist for the portable second machine, but most of these machines

have a feature that no CD-ROM design! In the market looking ahead, not the notebook with

optical drive is usually representative of portable machines, and their very light weight,

performance is not sloppy, though the price high above, but still get a lot can not stand

“pole effect”, the pursuit of highly mobile notebook users.

Perhaps you will say next in the dos disk to install, but a few people will use dos?

In fact, not only without worry about how notebook users drive installed system, those who

do not drive worry desktop users.

One is the mirror image of the operating system, and the other is to start the U disk. Here

we explain how to install deepin version of XP.

Note: Reading this article to install the operating system need to know some basic

knowledge.

windows 7 optimizer

windows 7 optimizer
Know the importance of memory, our memory is necessary in the choice of special attention.

Many people buy is a headache for the memory, indeed, due to the quality of memory on the

market good and the bad, the market flooded with fake and shoddy products, the purchase of

the time, really is to take some effort. Neicun nothing less than poor quality on the market

two forms, one of which is poor quality products, while another is off Remark (ie polished)

memory, that is, high-memory chip Remark clock cycle as the product of low clock cycle, then

clock cycle of products at low sell high, make the difference. Above the polished words of

memory chips is very clear, and there is no depth, a closer look you will find are printed

to their work. The Remark of the memory chips without the words above should be concave,

these words are laser engraved, hand when you can feel and touch the products Remrk is

different, therefore, the time of purchase as long as pay attention to will not be fooled.

Identification of poor memory for not so easy. Poor memory work together very unstable, the

rated frequency will appear to work, “the memory can not be read or written” phenomenon,

most of this type of memory PCB board is not required to use PC100 four and six boards but

rough work, uneven cutting edge of the board, and some with thorns. If you find such a

memory, it must be those of very poor quality products, that is what a bad hand workshop

production. The production cost of these poor memory than the formal channels to the much

lower production, so this type of memory are often priced lower than the genuine memory

dozens of dollars. You can not buy back in order to save these poor memory, that time may

somewhat outweigh the frequent crashes.

Also choose which size of memory, but also according to the motherboard and CPU, with the

decision. Currently on the market the most common type of memory is mainly DDR266, DDR333

and DDR400, respectively PC2100, PC2700 and PC3200. For the Athlon XP, the 2400 + and the

following models are front side bus frequency of 266MHz, so you can meet the single-channel

DDR266 CPU needs. Athlon XP 2500 + ~ 3000 + front side bus frequency is 333MHz, so take with

DDR333 memory. Similarly, 400MHz front side bus frequency of the Athlon XP 3200 + with

DDR400 memory is required only to meet demand. Since cost is not high-end products, there is

currently sufficient to meet the AMD platform needs to buy DDR333.

windows 7 optimizer

windows 7 optimizer
7, uncovered malicious program or service from the start

If the computer is some unintelligible error, such as unable to get online, according to

conventional thinking and find no problem, you can boot into Safe Mode with Networking to

see next, if there can be on, then a certain self- Start programs or services affect the

normal network connection.

8, incompatible hardware detection

XP As a result of digital signature style driver model, the detection of a variety of

hardware stricter than before, so some devices may not be driven in normal use conditions.

For example, some early CABLE MODEM, if you find that in the normal mode, XP does not

recognize the hardware, you can start when the press F8, and then select Safe Mode, in Safe

mode to detect new hardware, it is possible to correct for the increase CABLE MODEM load

drivers.

9, uninstall the driver is not correct

Drivers in general, does not apply if your hardware, you can uninstall the XP driver but

also the original. But the video card and IDE hard disk drive, if installed wrong, it is

possible to crash one into the GUI interface; some motherboard’s ULTRA DMA patch too,

because Windows is to always read the disk page file memory and adjust the computer state,

so the hard disk drive a system to crash immediately in question. At this point how to do

it?

In some cases, disabling the Administrator account can cause maintenance difficulties. For

example, in a domain environment, when used to establish a secure channel connection fails

for some reason, if no other local administrator account, you must restart the computer in

safe mode to fix the problem causing the connection status interrupt.

windows 7 optimizer

windows 7 optimizer
2, “Safe Mode” to restore

If the computer does not start, you can use “safe mode” or other boot options to start the

computer, press the F8 key when the computer starts, the boot mode menu, select Safe Mode,

then System Restore by following methods:

Click the “Start” → “All Programs” → “Accessories” → “System Tools” → “System Restore”

to open the System Restore Wizard, and then select “Restore my computer to an earlier time”

option, click the “Next “button, click on the calendar date displayed in bold selection

system restore point (Figure 3), click the” Next “button for System Restore.

3, killing the virus

Now the virus and more every day, anti-virus software updated every day. However, in

Windows, we are somewhat worried anti-virus, as they will most likely cross-infection. Some

antivirus programs and can not run in DOS, this time we of course can also boot to safe

mode, so Windows loads only the most basic drivers, so that the virus came from more

thoroughly to kill, but clean.

4, the lifting of the Group Policy lock

In fact, Windows, Group Policy restrictions are specified by loading the registry key to

achieve, but in safe mode does not load the limit. Hold down the F8 key to boot after

restart, the multi-boot menu in the Open window, select “Safe Mode with Command Prompt.”

Into the desktop, start the command prompt, enter “C: WindowsSystem32XXX.exe (you start the

program)”, start the console, and then in accordance with the above operation to lift the

restrictions, the final restart to unlock the normal sign-on system.

Note: Group Policy, many restrictions are in safe mode could not be effective, if not meet

the restrictions lifted, we might find a solution to the next.

5, the repair system failures

If Windows is running it is not stable or not start before this time do not just reinstall

the system, try restarting your computer and switch to safe mode, restart the computer after

the system is not already back to normal? If it is the Registry problem caused by system

failures, this method is very effective, because Windows in Safe Mode can automatically

repair registry problems, start Windows in Safe Mode successfully, generally to be in normal

mode (Normal) to start the.

6, restore system settings

If the user is installing a new software or change some settings, cause the system to not

start, but also need to enter safe mode to resolve, if it is caused by new software

installed, please uninstall the software in safe mode, if is to change some settings, such

as the display resolution is set beyond the display range, resulting in black screen, then

enter safe mode can be changed after the return, there is the screen saver with a password

on the “Start” menu, forget password, preventing normal operation of the computer into safe

mode can be changed.

windows 7 optimizer

windows 7 optimizer

Introduction to the second computer network: the system can easily fix mistakes, play a

multiplier effect. Safe mode works without loading the case of third-party device driver to

start the computer, the computer running the smallest model in the system, so users can

easily detect and repair errors in computer systems. How to enter as long as you start your

computer, enter in the system before Windows splash screen, press the F8 key (or hold down

the Ctrl key when you start the computer), there will be multi-mode operating system boot

menu, just select the “Safe M.. .
Text: I believe there is a part of the user on the Windows operating system security model

is still relatively vague application, we gave you talk about the following Windows security

model application skills.

Based security model

Safe mode is the Windows operating system in a special pattern, often using the computer’s

friends certainly will not feel strange, in safe mode the user can easily repair the system

some of the errors, play a multiplier effect. Safe mode works without loading the case of

third-party device driver to start the computer, the computer running the smallest model in

the system, so users can easily detect and repair errors in computer systems.

How to enter

As long as you start your computer, enter in the system before Windows splash screen, press

the F8 key (or hold down the Ctrl key when you start the computer), there will be multi-mode

operating system, start menu, just select “Safe Mode”, to be Start the computer in Safe

Mode.

Nine application skills

1, delete stubborn files

We delete some files in Windows, or clear the contents of resource recycling, the system

sometimes will prompt “a certain file is in use, can not be deleted” message, but do not use

these files, then you can try restarting the computer and into safe mode at startup. After

entering Safe Mode, Windows will automatically control the release of these documents, you

can delete them.

windows 7 optimizer

windows 7 optimizer
Introduction to the second computer network: 00% “style =” line-height: 18px; “> @ Press any

key to start @ pause sc config Alerter start = DISABLED sc config ALG start = DEMAND sc

config AppMgmt start = DEMAND sc config AudioSrv start = AUTO sc config BITS start = DEMAND

sc config? …
Text: the following code into Notepad and save as *. bat file, double-click operation, the

service will be able to restore the system to the default settings. – Www .002 pc.com
@ Press any key to start
@ Pause
sc config Alerter start = DISABLED
sc config ALG start = DEMAND
sc config AppMgmt start = DEMAND
sc config AudioSrv start = AUTO
sc config BITS start = DEMAND
sc config Browser start = AUTO
sc config CiSvc start = DEMAND
sc config ClipSrv start = DISABLED
sc config COMSysApp start = DEMAND
sc config CryptSvc start = AUTO
sc config DcomLaunch start = AUTO
sc config Dhcp start = AUTO
sc config dmadmin start = DEMAND
sc config dmserver start = AUTO
sc config Dnscache start = AUTO
sc config ERSvc start = AUTO
sc config Eventlog start = AUTO
sc config EventSystem start = DEMAND
sc config FastUserSwitchingCompatibility start = DEMAND
sc config helpsvc start = AUTO
sc config HidServ start = DISABLED
sc config HTTPFilter start = DEMAND
sc config ImapiService start = DEMAND
sc config lanmanserver start = AUTO
sc config lanmanworkstation start = AUTO
sc config LmHosts start = AUTO
sc config Messenger start = DISABLED
sc config mnmsrvc start = DEMAND
sc config MSDTC start = DEMAND
sc config MSIServer start = DEMAND
sc config NetDDE start = DISABLED
sc config NetDDEdsdm start = DISABLED
sc config Netlogon start = DEMAND
sc config Netman start = DEMAND
sc config Nla start = DEMAND
sc config NtLmSsp start = DEMAND
sc config NtmsSvc start = DEMAND
sc config PlugPlay start = AUTO
sc config PolicyAgent start = AUTO
sc config ProtectedStorage start = AUTO
sc config RasAuto start = DEMAND
sc config RasMan start = DEMAND
sc config RDSessMgr start = DEMAND
sc config RemoteAccess start = DISABLED
sc config RemoteRegistry start = AUTO
sc config RpcLocator start = DEMAND
sc config RpcSs start = AUTO
sc config RSVP start = DEMAND
sc config SamSs start = AUTO
sc config SCardSvr start = DEMAND
sc config Schedule start = AUTO
sc config seclogon start = AUTO
sc config SENS start = AUTO
sc config SharedAccess start = AUTO
sc config ShellHWDetection start = AUTO
sc config Spooler start = AUTO
sc config srservice start = DISABLED
sc config SSDPSRV start = DEMAND
sc config stisvc start = DEMAND
sc config SwPrv start = DEMAND
sc config SysmonLog start = DEMAND
sc config TapiSrv start = DEMAND
sc config TermService start = DEMAND
sc config Themes start = AUTO
sc config TlntSvr start = DISABLED
sc config TrkWks start = AUTO
sc config UMWdf start = DEMAND
sc config upnphost start = DEMAND
sc config UPS start = DEMAND
sc config VSS start = DEMAND
sc config W32Time start = AUTO
sc config WebClient start = AUTO
sc config winmgmt start = AUTO
sc config WmdmPmSN start = DEMAND
sc config Wmi start = DEMAND
sc config WmiApSrv start = DEMAND
sc config wscsvc start = AUTO
sc config wuauserv start = AUTO
sc config WZCSVC start = AUTO
sc config xmlprov start = DEMAND
@ Pause

windows 7 optimizer